Thick Film Chip Resistors Type CRG Series Characteristics Electrical Type CRG Series 10 2M0 1 F E24 0402 0.063 1 10 5 J E24 11 3M3 5 J E24 Temp. Coefficient (ppm/C) 100 400 200 Rated Power @ 70 C (W) Resistance Range Min (Ohms) Max Tolerance (%) Code letter Selection Series 0603 0.1 1 101 1 11 100 1M0 10 10M 1 1 5 5 F F J J E24 E24 E24 E24 E96 200 100 200 200 0805 0.125 1 101 1 11 100 1M0 10 10M 1 1 5 5 F F J J E24 E24 E24 E24 E96 200 100 400 200 Precious metal terminations are screen printed onto a ceramic base and fired. The resistive element is screen printed and fired and the passivation layer added. Each resistor is trimmed to tolerance by laser. The pre-scribed tile is broken into strips, the end plating is fired on and the strips broken into individual components. 1206 0.25 101 1 1M0 10 1 5 F J E24 E24 E96 Temp. Coefficient (ppm/C) 200 100 400 2010 2512 0.5 1 11 1 101 1 11 1 101 1 10M 100 1M0 10 10M 100 1M0 10 5 1 1 5 5 1 1 5 J F F J J F F J E24 E24 E24 E24 E24 E24 E24 E24 E96 E96 200 200 100 400 200 200 100 400 Rated Power @ 70 C (W) Resistance Range Min 1 Ohms Max 100 Tolerance (%) 1 Code letter F Selection Series E24 11 10M 5 J E24 200 Final termination is made by electroplating. Key Features I I I Thick film resistors with a high power to size ratio,ideally suited to industrial and general purpose use. A range from 1 ohm to 10M and tolerances of 1% and 5%. Also including zero ohm links. Suitable for most applications, including high frequency operation, owing to the short lead structure and low capacitance. 0402 50 50 Working Voltage (V) Max. Overload Voltage (V) Operating Temp. Range (C) Climatic Category (C) Insulation Resistance Dry Min (Mohms) Stability (%) Surface Temp. Rise Max (C/W) Zerohm (A) Current Max Resistance Max 0603 50 100 0805 1206 150 200 300 400 -55 to +125 55/125/56 1000 2010 200 400 2512 200 400 3 480 300 280 190 100 65 1 1 2 2 2 2 <20 mohm Dimensions L a Six Package Sizes W t b Literature No. 1773204 Issued: 06-09 Style L W t a b 0402 1.0 0.1 0.5 0.05 0.35 0.05 0.2 0.1 0.25 0.1 0603 1.6 0.1 0.8 0.15 0.45 0.1 0.3 0.2 0.3 0.1 0805 2.0 0.15 1.25 0.15 0.55 0.1 0.4 0.2 0.4 0.2 1206 3.1 0.15 1.55 0.15 0.55 0.1 0.45 0.2 0.45 0.2 2010 5.0 0.1 2.5 0.15 0.55 0.1 0.6 0.25 0.5 0.2 2512 6.35 0.1 3.2 0.15 0.55 0.1 0.6 0.25 0.5 0.2 Dimensions are shown for reference purposes only. Dimensions are in millimetres unless otherwise specified. Specifications subject to change. tycoelectronics.com passives.tycoelectronics.com Thick Film Chip Resistors Type CRG Series Marking Codes Case Sizes 0805 to 2512 IEC 4 Digit Marking Resistance 100 2.2K 10K 49.9K 100K Marking Code 1000 2201 1002 4992 1003 Case Sizes 0603 E24 3 Digit Marking - Example: 101=100 102=1K E24 10 11 12 13 15 16 18 20 22 24 27 30 33 36 39 43 47 51 56 62 68 75 82 91 E96 3 Digit Marking - Examples: 14C=13K7, 13C=13K3, 68B=4K99, 68X=49.9 0603 E96 Marking Code Table Literature No. 1773204 Issued: 06-09 Code E96 Code E96 Code E96 Code E96 01 100 25 178 49 316 73 562 02 102 26 182 50 324 74 576 03 105 27 187 51 332 75 590 04 107 28 191 52 340 76 604 05 110 29 196 53 348 77 619 06 113 30 200 54 357 78 634 07 115 31 205 55 365 79 649 08 118 32 210 56 374 80 665 09 121 33 215 57 383 81 681 10 124 34 221 58 392 82 698 11 127 35 226 59 402 83 715 12 130 36 232 60 412 84 732 13 133 37 237 61 422 85 750 14 137 38 243 62 432 86 768 15 140 39 249 63 442 87 787 16 143 40 255 64 453 88 806 17 147 41 261 65 464 89 825 18 150 42 267 66 475 90 845 19 154 43 274 67 487 91 866 20 158 44 280 68 499 92 887 21 162 45 287 69 511 93 909 22 165 46 294 70 523 94 931 23 169 47 301 71 536 95 953 24 174 48 309 72 549 96 976 Code A B C D E F G H X Y Z Multiplier 100 101 102 103 104 105 106 107 10-1 10-2 10-3 Dimensions are shown for reference purposes only. Dimensions are in millimetres unless otherwise specified. Specifications subject to change. tycoelectronics.com passives.tycoelectronics.com Thick Film Chip Resistors Type CRG Series Derating Curve Percent Rated Power 100 80 60 40 20 0 0 20 40 60 80 100 120 140 Ambient Temperature (C) Mounting The resistors are suitable for processing on automatic insertion equipment. Marking CRG0805, CRG1206, CRG2010, CRG2512 E24 series resistors are marked with a three digit code. E96 series resistors are marked with a four digit code. Zerohm components are marked '0'. CRG0603 E24 5% series are marked with a three digit code. E24 1% series are marked with a three digit code. E96 series are marked with the international alphanumeric three character code (available on request). EXCEPT 10, 11, 13, 15, 20 & 75 decades which are marked as the E24 series. CRG0402 series unmarked. Performance Characteristics The evaluation of the performance characteristics is carried out with reference to IECQ specifications QC 400 000 and QC 400 100. TEST REF Long Term Tests (3% + 0.1 ohm) 4.23 Climatic sequence 4.24 Damp heat, steady state 4.25.1 Endurance at 70 C 4.25.3 Endurance at 125 C TEST REF Short Term Tests (1% + 0.05 ohm) 4.13 Overload 4.32 Adhesion 4.33 Bond strength of end face plating 4.19 Rapid change of temperature 4.18 Resistance to soldering heat Storage Unopened reels should be stored within a temperature range of +5 C to +25 C, separated from any dust, chemicals and solvent based materials. Non-adherence to this procedure could effect the solderability of this product. How to Order CRG 0603 J 1K0 Common Part Size Tolerance Resistance Value F - 1% 1 ohm (1 ohm) 1R0 J - 5% 1K ohm (1000 ohms) 1K 0402 CRG - Thick Film Chip Resistor 0603 0805 1206 2512 100K ohm (100000 ohms) 100K 1M ohm (1000000 ohms) 1M Literature No. 1773204 Issued: 06-09 Dimensions are shown for reference purposes only. Dimensions are in millimetres unless otherwise specified. Specifications subject to change. tycoelectronics.com passives.tycoelectronics.com